DEVIL BOT

Devil Bot for Windows — download and setup

Three steps and about five minutes: extract the download, double-click one file, open Devil Bot. This page walks through each step, what you will see on the way, and what to do if something does not go to plan.

You need: Windows 10 or 11 (64-bit) · an internet connection for the one-time setup · Roblox with Fisch.

You do not need: an account, programming knowledge, or Python already installed — setup takes care of it.

The short version

  1. Download and extract.

    Download DevilBot-Windows.zip, right-click it and choose Extract All…

  2. Double-click 1 - Install Devil Bot.

    Once only. It installs what Devil Bot needs and puts a Devil Bot icon on your desktop. It is finished when it says All set.

  3. Open Devil Bot, press Quick setup, then Start.

    Join Fisch first (windowed or borderless). Reel one fish yourself for Quick setup; after that Start does the rest.

Step 1 — Download and extract

  1. Download the zip from the Devil Bot website. It is small, because setup fetches the rest.
  2. Unblock it first (this avoids a Windows warning later). Right-click the zip → Properties → at the bottom, tick Unblock → OK. If you cannot see an Unblock box, skip this.
  3. Right-click the zip → Extract All… → Extract. Use Windows' own Extract All so the whole folder comes out; do not run files from inside the zip preview.

Step 2 — Run the setup (once)

Open the extracted folder. You will see:

FileWhat it is
1 - Install Devil BotDouble-click this. It is the whole setup.
Uninstall Devil BotFor later, if you ever want Devil Bot gone.
START HEREThis guide.
programDevil Bot's files. Leave it alone.

Double-click 1 - Install Devil Bot. (Depending on your Windows settings it may show as 1 - Install Devil Bot.bat.)

A black window opens and says what it is doing. It works through up to four stages:

When you see All set, you are done. It asks Open Devil Bot now? (Y/N) — type Y and press Enter.

Step 3 — Open Devil Bot

Use the Devil Bot icon on your desktop, or press the Windows key and type Devil Bot.

A quick tour of the home screen

When Devil Bot opens you see a dark red-and-black window with two big buttons and a row of tools underneath. Hover over any of them and a line of text says what it does.

ButtonWhat it does
1 · Quick setupWatches you reel in one fish and works out where everything is on your screen. No boxes to draw. Do it once on each computer.
▶ StartSets up first if this computer is new, then fishes in the mode you picked just under it.
ASSIST / AUTOAssist shows HOLD / RELEASE on a small panel and never touches your mouse or keyboard — the safe way to start. Auto casts, handles the shake prompts and reels on its own.
Check this computerTests screen capture, the game window, text reading, the screen parser and whether clicks arrive (it clicks a small window of its own for a few seconds), and saves a report you can send if something is wrong.
Record screenFor troubleshooting only: saves 60 seconds of full-size pictures of the game (about 500 MB). It presses nothing.
GPS trackingType where you want to go (the three X, Y, Z numbers of the game's own coordinate line) and a small 3D arrow shows which way to walk. It only reads the screen; it never clicks.
EZ AppraiseRe-rolls a fish's mutation at the Drowned Appraiser until it matches the one you choose.
STOPTop right. Ends whatever is running and saves what it learned — give it a few seconds.
Open folderA small link at the right of the Tools heading. Opens the folder that holds your setup, reports and recordings.

Your first session

Before you start: open Roblox, join Fisch, and run it windowed or borderless windowed — not exclusive fullscreen. (In Roblox press Esc → Settings and turn Fullscreen off.) Nothing can draw over an exclusive-fullscreen game, and screen capture is less reliable there too. Any window size is fine, and so is a second monitor — Devil Bot looks on the screen where the game is.

  1. Open Devil Bot and press Quick setup.

    Then cast a line and reel in one fish yourself. Devil Bot only watches — it presses nothing. It finds the reel bar, the fish and the progress meter by what they look like, learns how your screen draws the arrows, and checks that it can read a fight back before it saves anything. When it says Saved, the Quick setup card shows a gold dot: Set up on this computer.

  2. Press Start with ASSIST selected.

    A small panel appears. Click into Roblox, cast, and as you reel the panel shows HOLD, RELEASE or FEATHER — what Devil Bot would do. It never touches your mouse in Assist. Reel a few fish and watch whether it agrees with you.

  3. Switch to AUTO when you are happy.

    Choose AUTO on the home screen (or press F6 in the game) and press Start again. Devil Bot now casts, clears the shake prompts and reels on its own. Keep Roblox in front.

Hotkeys

They work while the game is in front, so you never have to leave it.

KeyWhat it does
F7Start / pause
F6Switch between ASSIST and AUTO
F5Switch between Rod, Spear and Harpoon
F4Harpoon: save a snapshot of what Devil Bot sees (for troubleshooting)
F8Quit

The panel has a button for each of them as well.

Spear, harpoon and EZ Appraise

Using it every day

Updating and uninstalling

If something goes wrong

"Windows protected your PC" appears

This is Windows being careful about a file it has not seen before. Click More info, then Run anyway. To avoid it next time, unblock the zip before extracting it (Step 1).

Setup says it could not install Python

Do it by hand — it takes two minutes. Go to python.org/downloads, download the newest Python for Windows and run it. On the first screen of its installer, tick Add python.exe to PATH, then press Install Now. When it finishes, double-click 1 - Install Devil Bot again. (Python 3.10 to 3.14, 64-bit, works.)

The install failed while installing the parts (red text from "pip")

Nearly always the connection: no internet, or a proxy or antivirus blocking pypi.org. Check the connection and double-click 1 - Install Devil Bot again — it picks up where it stopped. If it keeps failing, install the Microsoft Visual C++ Redistributable from microsoft.com and try once more.

Setup says the text reader did not install, or did not start

Devil Bot still works — it falls back to Windows' own text reader, which is weaker on the game's outlined lettering (EZ Appraise is where you would notice). If the message mentions a DLL, install the Microsoft Visual C++ Redistributable from microsoft.com; Devil Bot picks the text reader up by itself the next time it opens. If pip could not download it, check the connection and double-click 1 - Install Devil Bot again.

It says Python has no Tk

Devil Bot's window is drawn with Tk, which comes with the python.org installer. Open Settings → Apps, find Python, choose Modify, make sure tcl/tk and IDLE is ticked, then run the setup again.

Devil Bot opens, but Quick setup never sees a fight

Check that Roblox is windowed or borderless windowed and fully visible (not covered by another window), then cast and reel in a fish again. Press Check this computer on the home screen: it reports what it can and cannot see, and saves a report.

Auto does not click

Make sure AUTO (not ASSIST) is selected — the top line of the in-game panel says which mode it is in. If Roblox was started as administrator, start Devil Bot the same way — Windows does not let an ordinary program send clicks to an elevated one. Press Check this computer: its mouse clicks part clicks a small window of its own and says whether the clicks arrived and where they landed, and Roblox must be the front window when a cast starts (Devil Bot's log says when it is not).

Clicks land in the wrong place, or the panel does not line up

This is almost always display scaling. Check this computer prints the scaling it found. Make sure Roblox is on one monitor and not stretched across two, then press Quick setup again.

My antivirus complains

Devil Bot is a set of plain Python scripts plus the packages it installs, and it sends mouse and keyboard input like any automation tool — some security programs are wary of that. You can read every file. If yours blocks it, allow the folder C:\Users\<you>\AppData\Local\Programs\Devil Bot.

Devil Bot will not open at all

Open C:\Users\<you>\AppData\Local\Programs\Devil Bot and double-click Check this PC. It prints what is wrong and saves a report. If a box appears saying Devil Bot could not open, the same message is saved as devilbot-error.txt in C:\Users\<you>\.fishbot.

Where are my files?

In C:\Users\<you>\.fishbot (press Open folder on the home screen). It holds your setup, what Devil Bot learned about each rod, session logs and reports. A report from Check this computer is saved there as wincheck-<date>.txt — send that file if you ask for help.

Privacy and safety